whiteclouds-logo-on-black
Search
North Carolina-3D USGS Historical Topography Raised Relief Map Q


To view hi-resolution images of individual city/location maps, click below on specific links


North Carolina-3D USGS Historical Topography Raised Relief Map Q

$289.99
50 percent off limited time
• Raised-relief 3D Height Determined by DEM data
• Fade Resistant Archival Inks
• Epoxy Coated for Strength and Waterproofing
• Ready to Hang with Pre-Installed Hardware (optional)
• Extraordinary 3D Accuracy
• Black Felt Borders
Qty:

Enrich your office decor or home with a 3D Topographical Raised Relief Map.   These raised relief maps are not flat.  They are three-dimensional, with the height being determined by Digital Elevation Model (DEM) data.  Many people struggle with reading 2D topographical maps, but everyone understands 3D raised relief maps.  The realism is phenomenal.

This 3D topographical raised relief map is built by combining USGS mapping data with DEM data.  3D Printing and 3D CNC routers are used to fabricate the models which make the topographical models extremely accurate. These models are strong - they are coated with epoxy, then finished with a sealer providing a weatherproof matt-finish.  These are not meant to be used in direct sunlight.

Quitsna, North Carolina 1981- View hi-resolution image of: Quitsna, North Carolina.    Mapping by USGS in 1981 - Longitude/Latitude: -77.125 x -77 x 36 x 35.875,    Grid Size: 7.5X7.5,    Map Scale: 24000,    State List: NC,    County List: Bertie,Martin

Quitsna, North Carolina 2002- View hi-resolution image of: Quitsna, North Carolina.    Mapping by USGS in 2002 - Longitude/Latitude: -77.125 x -77 x 36 x 35.875,    Grid Size: 7.5X7.5,    Map Scale: 24000,    State List: NC,    County List: Bertie,Martin

Quitsna, North Carolina 2010- View hi-resolution image of: Quitsna, North Carolina.    Mapping by USGS in 2010 - Longitude/Latitude: -77.125 x -77 x 36 x 35.875,    Grid Size: 7.5 X 7.5 Minute,    Map Scale: 24000,    State List: NC,    County List: Bertie,Martin

Quitsna, North Carolina 2013- View hi-resolution image of: Quitsna, North Carolina.    Mapping by USGS in 2013 - Longitude/Latitude: -77.125 x -77 x 36 x 35.875,    Grid Size: 7.5 X 7.5 Minute,    Map Scale: 24000,    State List: NC,    County List: Bertie,Martin

Quitsna, North Carolina 2016- View hi-resolution image of: Quitsna, North Carolina.    Mapping by USGS in 2016 - Longitude/Latitude: -77.125 x -77 x 36 x 35.875,    Grid Size: 7.5 X 7.5 Minute,    Map Scale: 24000,    State List: NC,    County List: Bertie,Martin

Quitsna, North Carolina 2019- View hi-resolution image of: Quitsna, North Carolina.    Mapping by USGS in 2019 - Longitude/Latitude: -77.125 x -77 x 36 x 35.875,    Grid Size: 7.5 X 7.5 Minute,    Map Scale: 24000,    State List: NC,    County List: Bertie,Martin

For large or custom orders, please contact us at 385-206-8700 or email at sales@whiteclouds.com

SKU: USGS0333Q
Material: PLA Plastic
Height: Varies based on Digital Elevation Model data
Strength Material: Epoxy
Color Materials: Ink Printing
Finish: Matt Finish Sealant

Superior Quality, Crafted By Hand

Our gallery 3D raised relief satellite maps are each crafted by hand.  They are professional 3D maps meant to compliment any room.

Our archival inks prevent fading, to preserve as much fine detail as possible over time.  A matt finish sealer is applied to the satellite model to provide a waterproof barrier.   Black felt matting is applied to the sides of the raised relief model to create a superior looking map.  With a choice of a tabletop or wall-hanging model, both are fabricated using materials that provide a quality feel.

Our materials are gallery quality. 3D raised relief models are built with high quality, UV-resistant, environmentally-friendly, fade-resistant, latex archival inks. Our archival inks prevent fading to preserve as much fine detail as possible over time.

Construction:

Built to last with a rugged composite core of 3D printed plastic and a double coated 2-part epoxy hardener. This core is mounted to a 5/8" engineered wood composite of Medium Density Fiberboard (MDF) that is wrapped in vinyl for easy cleaning. The model is extremely strong and very accurate. Finishing of the model is done with a special sealer providing a weatherproof, stain-resistant matt-finish. A flocking is applied to all edges to give a high-end museum quality finish.

Museum-quality edges



Remarkably Strong: Watch a 1-ton truck drive over our topography models



We create our 3D models to scale as accurately as are the original imagery and digital elevation files.



Printers and Ink

We have the latest HP Latex printers and archival ink to produce consistent and quality results. The inks are environment-friendly and reduce fading for up to 200 years according to HP.

If you purchased the tabletop model, there is no installation. For the wall hanging model, hardware comes installed on the 3D raised relief map/topography. The type of hanger depends on the size of the art-piece. It may be a sawtooth hanger or a pre-installed cable bracket system for larger 3D raised relief maps.

Installation is as easy as placing 1 or 2 screws/nails into the wall and then laying the cable or hanger over them. Lastly, tilt the 3D raised relief model until it is level.

Stainless steel cable hangers for larger raised relief models



Sawtooth hangers for smaller raised relief models

WhiteClouds is located in Ogden, Utah. All products are manufactured and shipped from our facilities. Various shipping methods will be used depending on the size of the product and the size of the order. Your shipment will be delivered by standard shipping carriers. Smaller packages will be delivered by USPS or FedEx. Larger and oversize packages will be delivered by UPS Freight or LTL carriers (motor cargo). Shipments may be divided up and delivered in multiple packages. When the package has been shipped, you will receive an email from us with tracking information.

For special shipping considerations, please contact us at 385-206-8700 or email at sales@whiteclouds.com

ORDER CANCELLATION:  At WhiteClouds, we have a great team that works hard to fabricate and complete your order by hand, with the highest degree of quality.   Once you place your order, our team begins the process of creating your unique canvas wrap.   To cancel your order, you must contact us within 24 hours of placing your order by calling 1-385-206-8700 or email us at support@whiteclouds.com.

Any cancellation requests after the 24-hour period will not be accepted.


DAMAGED ITEMS:  Even though WhiteClouds takes great care in preparing items for shipment, occasionally there is damage during shipping.   If you receive your order and it is damaged or broken, we will gladly replace your items.  If you receive the wrong canvas, we will gladly replace it at no extra cost to you!

Please report the damage within 24 hours of receiving the item(s) by contacting us at 1-385-206-8700 or email us at support@whiteclouds.com and we will send you a replacement.

To view our Return Policy and Satisfaction Guarantee, click here.

SATISFACTION GUARANTEE:  We want you to be 100% satisfied with your purchase so we offer a 30-day money back guarantee.   If you don't like your canvas, simply ship it back to us as per our instructions and we will provide you with a full refund.   Contact us at 1-385-206-8700 or email us at support@whiteclouds.com and we will instruct you on how to return your purchase.

Please note that we do not cover the cost of return shipping, it is the responsibility of the customer to cover return shipping costs.

To view our Return Policy and Satisfaction Guarantee, click here.

How long does it take to fabricate a topographical raised relief map?  Each topography map is carefully crafted by hand and usually takes 7 - 10 days.  

Can WhiteClouds ship to multiple locations? Yes, there may be additional shipping and handling charges.  Please contact us to discuss options.

What is the warranty?  Whiteclouds topography models are warranted against defects in material and workmanship for 3 full years from the date of shipment.  Misuse, neglect or alteration of product is not covered under this warranty. To view our Return Policy and Satisfaction Guarantee, click here.

What if I want a different size topographical model?  We can fabricate custom sizes for our topographical maps.  Please look at our fabrication services at https://www.whiteclouds.com, call us at 1-385-206-8700, or email us at sales@whiteclouds.com.

What types of organizations are WhiteClouds customers? We work with customers all over the world in many industries, including many Fortune 500 organizations.  See some of our customers here

Do you have a question we didn‘t answer? Don't hesitate to contact us at 1-385-206-8700 or email us at support@whiteclouds.com.